Service Hangar I
Daimler-Benz Aerospace AG, Manching
Description of work
The hangar has got a 152 m free spanning plane truss girder. The hangar can be extended by 50 m to one side. The roof girders are situated transverse to the truss girder at a distance of 12.6 m with purlins above spaced at intervals of 6 m. The roof plane is designed as shear panel, transfering it´s loads to both gable walls and the rear wall. Equipment: Two 10-tons single-girder suspension cranes, moveable over the entire inside area.
Technical data:
|
Hall length |
152.40 m |
| Hall width | 57.00 m |
| Hall height | 28.00 m |
| Truss girder height | 9.00 m |
| Gate | 8 door-wings |
| Clear gate opening | 75.00 m |
| Clear gate height | 18.40 m |
| Office annex, 2-storeys | |
| Building length | 113.40 m |
| Building width | 9.20 m |
| Building height | 8.37 m |
